How to Repair the Warp Knitting Machine

When the knitting machine is working, all the internal components are changing. In the long run, there may be various problems. Therefore, it is necessary to carry out proper maintenance on each part, so as to avoid all kinds of problems, better meet the demand of production and promote the progress of the industry. How should the knitting machine be overhauled?

1. Regularly fill all kinds of lubricating oil or grease in the designated friction parts, so as to reduce the wear of the parts and save power. There are many sliding friction parts on the knitting machine, such as the tripod sliding back and forth in the guide rail, the needle sliding up and down in the needle slot, etc. These sliding not only consume a lot of power, but also accelerate the wear of the parts and affect the service life of the machine. Therefore, in order to make the machine run safely, produce normally and reduce labor intensity and power consumption, lubrication is very important.

2. The performance adjustment of the take-up spring of the lead frame, the smoothness of each wool yarn passing through the channel of the lead frame, the device state and damage of the brush, the device state and damage of the yarn feeding nozzle, the normal state of various parts on the surface of the tripod, the correct state and wear of each looped triangle, and the adjustment and wear of the adjusting iron of the tripod.

3. If there are no problems in the site and machine debugging, the sound of the machine will generally not be loud during normal operation, and the noise problems in the later stage are basically caused by improper maintenance and failure to eliminate and solve the problems of the machine in time.